Posts

Showing posts with the label Sodium Thiosulfate in microbiological testing

Sodium Thiosulfate (STS) in Raw Water Analysis: Role, Mechanism, and Importance in Accurate Microbiological Testing

Image
Sodium Thiosulfate (STS) in Raw Water Analysis: Why It Is Critical for Accurate Microbiological Results Table of Contents Introduction Principle of Sodium Thiosulfate in Raw Water Analysis Procedure Overview Mechanism of Action (Process Flow) Scientific Rationale and Justification Regulatory Expectations and References Practical Scenarios and Real Laboratory Examples Failure Risks, Probability, and Avoidance Strategies Common Audit Observations Frequently Asked Questions (FAQs) Summary Conclusion Introduction In pharmaceutical and microbiological laboratories, raw water testing is not merely a routine activity—it is a critical control point . One small oversight during sampling can completely invalidate microbial results. Among the most common yet misunderstood factors affecting raw water analysis is residual disinfectant , especially chlorine. This is where Sodium Thiosulfate (STS) becomes indispensable. Its role is not cosmetic, op...
Read more

Popular posts from this blog

TNTC vs TFTC in Microbiology: Meaning, CFU Calculation, Countable Range & GMP Guide (2026)

Image
⚠️ GOT A TNTC PLATE? A TNTC or TFTC result is not simply a “high count” or “low count.” The real questions are: Can the plate be counted? Which dilution should be used? Can CFU be calculated? What does the GMP procedure require? TNTC vs TFTC in Microbiology: Meaning, CFU Calculation, Countable Range & GMP Guide (2026) ⚡ 5-Second Answer TNTC = Too Numerous To Count. The plate has growth beyond the reliable counting capability of the applicable method. TFTC = Too Few To Count. The observed growth is below the applicable quantitative/counting range. Important: Neither term should be interpreted alone. Always apply the approved/validated method, SOP, applicable pharmacopeial requirements and predefined reporting criteria. If you are a microbiologist looking at a plate marked TNTC or TFTC , the next step matters more than the label. This practical guide shows what TNTC and TFTC mean, how to select an appropriate dilution, how to calculate CFU, when a result n...
Read more

Non-Viable Particle Count (NVPC) in Cleanrooms: Principles, Methods & GMP Requirements

Image
Non-Viable Particle Count (NVPC) in Cleanrooms: Principles, Methods & GMP Requirements Non-Viable Particle Count (NVPC) in Cleanrooms: Principles, Methods & GMP Requirements ⬆ Back to Table of Contents 📌 Table of Contents Introduction to Non-Viable Particle Count (NVPC) What Are Non-Viable Particles? Why NVPC Monitoring Is Critical in GMP Cleanrooms Cleanroom Classification Based on NVPC Regulatory Guidelines Governing NVPC NVPC Monitoring Methods Practical GMP Examples Alert and Action Limits for NVPC Trending and Data Integrity Common Regulatory Audit Observations Frequently Asked Questions (Q&A) Conclusion NVPC and Microbial Contamination Relationship Cleanroom Airflow & NVPC Control NVPC in Contamination Control Strategy (CCS) Risk-Based NVPC Monitoring Continuous vs Periodic Monitoring Alert & Action Level Philosophy NVPC Excursion...
Read more

USP 41; Balances Explained (2026): Measurement Uncertainty, Minimum Weight, Audit Readiness; Why USP Revised the Rule

Image
USP <41> Balances (Recent 2026 Update): Measurement Uncertainty, Minimum Weight, Audit Readiness Guide ⚠ INSPECTION WARNING: During recent GMP inspections, regulators cited laboratories for failing to document measurement uncertainty and incorrect minimum weight calculations under USP <41>. One incorrect weighing below validated minimum weight can invalidate sterility tests, assay results, and even entire commercial batches. Hook Line: If your balance does not have a scientifically justified minimum weight and documented uncertainty — your data is at regulatory risk. USP <41> 2026 Key Requirements: Minimum weight formula: m min = 2000 × s Measurement uncertainty must be included in calibration certificates Conformity decision rule must be documented Net sample weight must exceed validated minimum weight Non-compliance may result in GMP audit observation 📑 Table of Contents 1. What Changed in USP <41> (2026 Recent Update) 2. Scientif...
Read more